Model 816 PAF 406-98, 16” Offset Manhole with Emergency Drain Plug, DOT 406 PRD
Betts PAF manhole with integral 406-98 Surge Suppression Pressure Relief Valve is the proven leader for cargo tank durability, protection and safety.
The 406-98 incorporates a 10” (254mm) reclosing pressure relief valve (PRV) that satisfies primary pressure relief for specification US DOT406 and TC406 cargo tanks. The PRV meets the dynamic pressure surge requirements of 49CFR§178.345-10(b)(3)(ii) with less than one-liter leakage as tested per TTMA RP No. 81. The PRV cover also serves as a quick-open inspection hatch that incorporates a secondary safety catch. PPVL models include a 6496 P/V normal vent.
The offset 16” (406mm) clamp ring style manhole has provisions for mounting a vapor recovery valve and liquid level sensor. Manhole and clamp ring are certified and marked in accordance with 49CFR178.345-5 with a test pressure of 36 psig.
PAF 406-98 is also available in a self-latch model by designating part number L842 in place of L816. On self-latch models, a stop bracket holds the PRV at a 91° position; if the cover is inadvertently left open, movement of the tank will cause PRV cover to drop and catch to a semi-closed position.
PAF 406-98 PRV must not exceed a maximum temperature of 212°F (100°C). Stainless versions of the PRV are available using prefix “PPSS”. For replacement on MC306 cargo tanks, see Betts’ line of PAF306 surge manholes.
- Last letter of part number designates seal material. See gasket material table.
Use part number PPVL842 for self-latch unit.
Suffix “059” option for padlock loop installed in strongback.
Prefix “PSA” for both 6496 normal vent & 6234AL inbreathing vent included.
Suffix “092” option with stainless hardware (strongback and latch).
Weld Collar NOT included with assembly. Collar material should correspond with tank shell material. When welding collars to tank, care should be taken to insure collar remains flat and round with use of a welding fixture if necessary.
Letter Gasket Material
B Nitrile (Buna-N)
V FKM Type A (Viton™ A)
P EPDM
T PTFE (w/ Nitrile or Silicone Core)
W White Hypalon
See catalog page S80P0A for full list.
Technical Specifications
PAF 406-98 Pressure Relief Valve
Set Pressure (PRV Designed for 3.3 psig MAWP tank) Min. 3.63 psig [25.0 kPa] Max. 4.55 psig [31.4 kPa]
Rated Air Flow Capacity 494,084 SCFH 6.25 psig [13,992 SCMH 43.1 kPa]
294,985 SCFH 5 psig [8,353 SCMH 34.5 kPa]
Liquid Flow Capacity 1,335 gpm 5.0 psig [5,053 lpm 34.5 kPa]
6496AL Normal Vent (P/V Vent)
Pressure Set 1.0 psig [6.9 kPa] Flow Capacity 1,200 SCFH 3 psig [34 SCMH 20.7 kPa]
Vacuum Set Max .375 psig [Max 2.6 kPa] Flow Capacityv 3,350 SCFH 1 psig [95 SCMH 6.9 kPa]
