Rechargeable led torch light with power 4W, super long range, and rechargeable battery/dry battery dual use. Hard shell, corrosion resistant, and easy to operate.
Specification
| Model | ATO-WFL-D2LG | ATO-WFL-D3LG | ATO-WFL-D4LG |
| Length | 256mm | 316mm | 376mm |
| Weight | 420g | 513g | 596g |
| Battery | G2 lithium battery rechargeable battery | G3 lithium battery rechargeable cell | G4 lithium battery rechargeable battery |
| Capacity | 2000mah | 2300mah | 2800mah |
| Battery life | 2.5 h-10 h | ||
| Light source | XPE | ||
| Brightness | 400lm | ||
| Power source | 4W | ||
| Charging time | 10h | ||
| Effective range | 200 meters | ||
| Light source life | 50,000h | ||
| Shell material | Aluminum alloy | ||
| Battery service life charge and discharge times | More than 500 times | ||
| Lithium battery model | 3.7V rechargeable battery | ||
| Dimension | 25.6cm*31.6cm*37.6cm |
Feature
- The rechargeable flashlight has a 400lm high power wick, and 4W high-brightness high-power bulbs are used to maintain a stable high-beam vision at all times.
- Equipped with high-compression aluminum alloy, the led flashlight is anti-rust, compression, and corrosion resistant.
- Strong light, general light, and flash modes can be adjusted.
- Rechargeable torch rechargeable battery/dry battery dual use.
- Correctly grasp the charging time. During use, the charging time should be grasped according to the actual situation. Generally, the battery is charged at night, and the average time is about 8 hours. The battery is charged once when the depth of discharge is 60%-70%.
Size
| Model | Length | Material | Output voltage | Power | Capacity | Charge |
| G2 | 120mm | ABS | 3.7V DC | 5W | 2000mah | 10h |
| G3 | 180mm | ABS | 3.7V DC | 5W | 2300mah | 10h |
| G4 | 240mm | ABS | 3.7V DC | 5W | 2800mah | 10h |
Note: The red light is displayed when charging, and the green light is displayed when it is fully charged. The charging time should not exceed 20 hours.
Tips: Maintenance measures for rechargeable flashlights
- Do not lose power when storing. The state of power loss means that the battery is not charged in time after use. The longer the idle time in the power-deficit state, the more serious the battery damage will be.
- Do not expose to the sun. If the temperature is too high, the environment will increase the internal pressure of the battery, forcing the battery pressure limiting valve to open automatically. The direct consequence is to increase the water loss of the battery and accelerate fatal damage.
- Regular inspection. Try to avoid instantaneous high-current discharge. The high-current discharge will easily lead to the crystallization of lead sulfate and damage the physical properties of the battery plate.
